Product Profile:
This press can realize tire loading, shaping, vulcanizing and unloading automatically. Tire can be cooled automatically with post cure inflator. It can adopt two-half mould and segmented mould.
Structure characteristics:
The machine consists of frame, mould opening/closing device, mould adjusting device, center mechanism, curing chamber, loading device, tire unloading device, hydraulic system, electrical system, pipeline system and post cure inflator etc.
Electrical Control system:It adopts PLC as control center, which has touch screen for display unit. The touch screen can display curing state, we can realize the man-machine conversation, such as technology choosing and parameters modification etc.
Our Machine Advantage:
Hydraulic pressure drives the mould opening/closing and center mechanism.
Multi-cylinder provide pressure to make even force and small deformation on platens
The safety lock can make sure the safety for maintenance
The mould height can be adjusted automatically
The hydraulic system adopts Yuken, Rexroth, Parke world famous brand which can work safely, reliably and without any leakage
Low energy consumption
Advanced control system can finish the setting of vulcanizing and parameter changing rapidly.
Technical Parameter of Motorcycle Tire Vulcanizing Curing Press Machine:
| Tire type |
Motorcycle Tire |
Motorcycle Tire |
| Specification |
8"- 21" |
4"- 12" |
| Mould quantity |
2-4 |
2-4 |
| Total pressure(each mould)(Mpa) |
100 |
60 |
| Hydraulic system pressure setting value (Mpa) |
<=21 |
<=21 |
| Hydraulic working pressure setting value(Mpa) |
<=19.5 |
<=19.5 |
| Hot plate diameter(mm) |
950 |
650 |
| Insulation cover inner diameter(mm) |
975 |
700 |
| Max distance between hot plates(mm) |
1000 |
1000 |
| Applicable mould height(mm) |
120-300 |
120-300 |
| Green tire thickness(mm) |
450 |
450 |
| Demoulding force,(KN) |
750 |
750 |
| Max jacking tire height(mm) |
200 |
200 |
| Open(close) mould speed(mm/s) |
60 |
60 |
| Heating steam pressure of hot plate(Mpa) |
Max 1.0 |
Max 1.0 |
| Pressure of inner pressure or compressed air(Mpa) |
1.5-2.3 |
1.5-2.3 |
| Pressure of shaping pressure or compressed air(Mpa) |
0.1-0.2 |
0.1-0.2 |
| Pressure for water(gas) cylinder (Mpa) |
1.5-2.0 |
1.5-2.0 |
| Compressed air pressure for controlling (Mpa) |
0.35 |
0.35 |
| Vacuum(Mpa) |
0.013-0.026 |
0.013-0.026 |
FQA-Problems of customer concern:
About machine performance quality
1. Q: How to guarantee the quality of outsourcing parts?
A: First choice more than 2 suppler by tender, There are strict system and process for inspecting outsourcing parts. And there are outsourcing inspectors, after inspection, qualified goods, labeling and storage. Not qualified, return.
2. Q: Which brand of electric part?
A: Use world famous brands, Siemens, Omron, Toshiba, ABB
Customer can specify the brand.
3. Q: Which PLC?
A: Siemens, Omron, Mitsubishi
4. Q: How to control the quality?
A: There are inspectors for inspecting equipment quality and performance, after assembly, machine run continuously for at least 12 hours at one time, Total running time should be not less than 48 hours.
About installation
1. Q: When the guide engineer arrive at customer's factory?
A: If need installation on site, engineer will arrive at factory within one week after machine arrived at factory.
About after-sales service
1. Q: What is the warranty time?
A: 2 years after machine arrived at factory
2. Q: How to solve the problem?
A: Within one hour after getting customer' problem, inform the solution way, there are three ways for different conditions. 1, Which can be solved by phone or Email, it will be solved in two hours. 2. Which can be solved by Remote Control, it will be solved within four hours(machine is equipped by Remote Network Control Problem). 3. Which need solve it on site, engineer arrive at factory within one week(in the two years warranty date, engineer has the visa any time of the country where the machine.
Machine Assembly At Our Factory:
Machine Running at Customer's Factory:
Foreign Customers Visit Factory:
Will Gao
Sales manager
Qingdao Maoyuanfeng Industry & Trade Co.,Ltd
A:Shijidadao Road, Huangdao District, Qingdao, Shandong, China
){kind=link}